• Always check the User Manual for guidance on the safe use of your NutriBullet 1200 Series. Also refer to the Safety information topics in this guide for information.

    WARNING: The extractor blade is very sharp. Handle with care.

    Never leave the NutriBullet 1200 Series running for more than one minute at a time, or for more than 3 consecutive one minute intervals.

    Never blend heated or carbonated ingredients, this could cause the cup to pressurize and leak.
  • 1.

    Place the ingredients into the desired cup.

  • 2.

    Add the desired liquid up to the ‘MAX’ level.

    Always ensure that your mixture contains enough liquid for the ingredients to move.
  • 3.

    Place the extractor blade onto the cup.

  • 4.

    Turn the extractor blade clockwise until they have a tight seal.

  • 5.

    Plug the power lead into the mains power.

  • 6.

    Line up the tabs on the cup with the tabs on the power base.

  • 7.

    Press the cup down onto the power base and twist the cup clockwise. This will lock the cup into the power base.

    The unit will activate as soon as the cup is pressed down.
  • 8.

    The G button on the front of the power base will glow green when extraction begins.

  • 9.

    Press the G button.

    NOTICE: You must press the G button within the first 5 seconds of extraction for this function to work.

  • 10. The G button will glow blue.
  • 11.

    The NutriBullet 1200 Series will start a pre-programmed, first extracting in short pulses, then one longer extraction period before automatically powering off.

    WARNING: If the power base does not stop after 1 minute, unplug it and call customer services.

  • 12.

    Turn the cup anticlockwise to release the tabs, while holding the power base with your other hand.

  • 13.

    Remove the cup from the power base.

  • 14.

    Remove the power lead from the mains power.

  • 15. Turn the extractor blade anticlockwise.
  • 16.

    Remove the extractor blade from the cup and serve.