• Always check the User manual for guidance on the safe use of your Verti Steam Pro.


    DO NOT use horizontally, the Verti Steam Pro has been designed for vertical use only.
    DO NOT aim the Verti Steam Pro at people or animals or steam clothes being worn.


    Remember: You will be working with hot water and steam, so always ensure that all the safety requirements are fully in place before using and please exercise care and caution as you follow the steps in the guide.

  • 1.

    Once the water tank is full, plug the Verti Steam Pro into the mains power.

  • 2.

    Press and hold the on/off button until the blue light begins to flash, then release the on/off button.

  • 3.

    The blue light will flash for approximately 45 seconds until the Verti Steam Pro reaches temperature.

  • 4.

    The blue light will then remain on when the Verti Steam Pro is ready to use.

    The Verti Steam Pro will automatically go into stand-by mode after 15 minutes if it is not used.

  • 5.

    When finished, turn the Verti Steam Pro off by pressing and holding the on/off button until the blue light goes out.